What "contract grade" furniture means
Furniture for a hotel, pub or restaurant has to cope with far more use than a sofa at home, and it is tested differently. What the term covers, and what to ask for.

At a glance
- "Contract" means furniture for non-domestic use: hotels, pubs, restaurants, bars, cafés, clubs and other workplaces.
- Strength and durability: BS EN 16139 covers non-domestic seating (new edition, 2025) and BS EN 15372 covers non-domestic tables.
- Fire: seating is classified under BS 7176 and beds under BS 7177; hospitality venues are usually medium hazard, which includes Crib 5.
- Fabrics: wear is measured with the Martindale rub test; the higher the rub count, the harder-wearing the cloth.
"Contract grade" is not a single certificate. It is shorthand for furniture made and tested for non-domestic use, where a chair may be sat in dozens of times a day, dragged across a floor and cleaned every night. Three things set it apart from furniture for the home: strength and durability, fire safety and the fabrics it is covered in.
Strength and durability
- Seating: BS EN 16139. The British and European standard for the safety, strength and durability of non-domestic seating, for adults up to 110 kg. A new edition was published in 2025, adding tests such as a backward fall test and finger entrapment checks. It does not cover office work chairs, chairs for schools, ranked seating or outdoor seating, which have standards of their own.
- Tables: BS EN 15372. The equivalent standard for non-domestic tables, including tables with glass. Earlier editions grouped uses into light (such as hotel bedrooms), general (hotels, cafés and restaurants) and severe (such as nightclubs).
- Ask for the evidence. If a specification calls for these standards, ask your supplier which pieces have been tested, to which level of use.
Fire safety
Furniture for the home falls under the 1988 furniture fire regulations. Furniture for hotels, pubs and restaurants comes under the Regulatory Reform (Fire Safety) Order 2005 instead, which asks whoever runs the building to make sure the furniture suits the fire risk. Hospitality venues are generally treated as medium hazard: seating is classified under BS 7176 and mattresses and bed bases under BS 7177, and at medium hazard both include the test known as Crib 5. More in our fire safety guide.
Fabrics that last
A fabric's resistance to wear is measured with the Martindale method (BS EN ISO 12947-2): the cloth is rubbed and checked at fixed intervals until it breaks down, and the result is given as a number of rubs, or cycles. Coated fabrics such as faux leathers are tested by a different method. For a busy bar or restaurant, look for a high rub count and an easy-clean or waterproof finish; our fabric and leather range pages give the rub count where the maker publishes one.
How we build for contract use
Our sofas, beds, tub chairs and banquettes are made to order in our own workshops in Salford and Blackburn, and every fabric we offer meets BS 5852 (Crib 5), the fire standard for contract upholstery. Three designs made for busy venues:
EST Tub Chair
A classic rounded tub chair, fully upholstered, on short tapered legs. It appears in many of our projects, from Bramhall Lane Tennis Club to the Red Lion.
Columbus Sofa
A clean, tailored sofa with slim square arms and loose cushions, as made in leather for The Ainscow Hotel.
Joyce Side Chair
An upholstered shell with a cut-out between back and seat, on splayed timber legs.
Tell your account manager how the furniture will be used, and the hazard level in your fire risk assessment, and we will specify to suit.
This is a summary for buyers, not legal advice. Your fire risk assessment, and your fire safety adviser, decide what your venue needs.
Sources
- BS EN 16139:2025, Furniture. Safety, strength and durability. Requirements and test methods for non-domestic seating (BSI) (opens in a new tab)
- New version of non-domestic seating standard BS EN 16139 published (FIRA, 1 Aug 2025) (opens in a new tab)
- BS EN 15372, Furniture. Strength, durability and safety. Requirements for non-domestic tables (BSI) (opens in a new tab)
- Fire safety: furniture and furnishings (VisitBritain, updated 14 Aug 2025) (opens in a new tab)
- ISO 12947-2:2016, Determination of the abrasion resistance of fabrics by the Martindale method: specimen breakdown (ISO) (opens in a new tab)
Checked on 16 November 2026.






